Hardwood Floor Refinishing Basics
Hardwood floor refinishing is something many homeowners often think they cannot do. Consider the amount of work involved. You’ll have to clean up messes left by sanding, sealing, staining, and applying several coats of an attractive oil-based wax, as well. Doing it all yourself would cost at least double what a professional company would charge, or possibly more, but these professionals of Hardwood Floor Refinishing are trained and will surely provide a quality job.
So, just what can you do to save money on hardwood floors refinishing? Think about it-do you really are up for all that? Here are some useful tips on how to properly refinish hardwood floor floors at home. Start by measuring your hardwood floor. This first step will save you time and money because you won’t have to pay a professional to do it for you.
Measure the floor to determine how much sandpaper you’ll need. Buy a few extra sandpapers just in case you end up sanding less than you were planning. Start your sanding by applying a thin coat of penetrating solvent such as Murphy’s Oil Soap to the wood floors to get them started. Make sure to stir the solution thoroughly before you start sanding, as it’ll prevent the solvents from wearing away at the wood. Apply the solvent, let it sit for a few minutes, and then move the boards around to distribute the solution evenly.
Next, you’ll want to use high-grit sandpaper to remove scratches. Please don’t bother with using the recommended fine-grit sandpaper; it won’t remove deep scratches. Start by sanding one entire side of the board at a time. Go slow and start on the far side first to minimize scratching. Follow this up by sanding the board’s center per square inch, paying special attention to nooks and scratches.
When you’re done with hardwood floor refinishing, you’ll want to use a power sander. Purchase a sander that has a medium to heavy-duty duty motor. A sander with a light or moderate kickback is ideal because it won’t damage your legs or wrists if you accidentally hit it. The best ones have interchangeable bits, which allow you to work on different room parts at once. Look for a sander that also comes with rubber or anti-skid feet to keep your feet safe.
You can expect your wood floors to be about two hundred percent stronger after hardwood refinishing, which will make them more resistant to wear and tear. The resiliency also makes it easier to clean, allowing you less chance of water damage. Refinishing also increases the color and gloss of your wood flooring, making it more attractive to buyers. It’s possible to buy premixed sealants, or you can mix your own mixture, depending on your preferences. Make sure to follow instructions carefully to avoid damaging your wood.
If your flooring still looks good but needs some TLC, there are products available that accomplish several tasks. An inexpensive buffer, often sold as part of an organic vapor barrier system, can be used as an underlay between the floor and furniture. A buffer like this should be made of particleboard and a thick enough buffer pad with a vapor barrier to protect the flooring from moisture. These buffer systems are inexpensive and don’t require sanding.
Other options include refinished hardwood and sealed flooring. Refinishing takes away imperfections from your floor that you can’t get with sealants. This option is less expensive than other refinishing methods. It’s also a great way to restore the luster of an old finish if it’s been damaged.
If you have lots of deep scratches on your floor, consider a method called reporting. This process involves exposing the floor to hot water and using an acid wash to remove the top layers of the finish and expose the fresh, new finish underneath. The result is a scratch-free finish with minimal surface scratches. To do this process, take out the old finish and place it in a basin filled with hot water for five minutes.
There are several different types of applicators to choose from. If you’re looking for something easy to use, try a foam applicator with grooves for precise straight application. Grooves allow the foaming agent to spread evenly across the floor. Polyurethane applicators are also a popular choice for refinishing floors and are available in either a stick or spray form.
When it comes to refinishing hardwood floors, remember to pick a product that’s right for your situation. There is no single type of product that will work for all hardwood floors. If you need more information, be sure to ask a local retailer or do some research online. If you’re unsure about a particular type of product, always read labels and discuss how and when to apply with your installer.